An assessment of base load concentrating solar thermal power generation for New Zealand

With increasing pressure being placed on traditional energy sources, both in terms of supply and also regulatory, there is an increasing need to explore alternative generation technologies. In global terms, solar energy has the potential to make a significant contribution to worldwide energy demands in the future. This study examines recent developments in the emerging field of concentrating solar thermal power generation and explores the potential for base load electricity generation using this technology in New Zealand

Performance of a building integrated solar combisystem

Solar combisystems providing both water and space heating to buildings are becoming commonplace in European and North American locations. However, the use of these systems in Australia and New Zealand is still in its infancy. While significant work has been undertaken to characterise the performance of these systems in northern hemisphere locations, this does not necessarily reflect their performance in Australia or New Zealand. This work examines the performance of solar combisystems utilising TRNSYS and F-chart simulations of an integrated solar thermal combisystem installed in a single storey detached dwelling under typical Australian and New Zealand climatic conditions. In doing this, it shows that there is significant scope for increased use of solar combisystems in the cooler climate regions of Australia and New Zealand

Performance of a building integrated collector for solar heating and radiant cooling

Due to their limited temperature range, unglazed solar collectors have long been relegated to providing low cost heating in applications such as swimming pool heating systems. This limited temperature range is due to heat loss: firstly by convection to the surrounding air and secondly by radiant heat transfer to the cold sky. During the day an unglazed collector can be operated as a standard solar absorber to heat water in a storage tank. However, it is possible to take advantage of radiant cooling of unglazed solar collectors by operating them at night. Under night conditions when there is no solar radiation and the sky temperature is low, the collector can radiate heat to the sky and cool a cold storage tank to provide cooling in the building the following day. This study theoretically and experimentally examines the performance of a building integrated collector for heating and cooling and explores the contribution it can make to heating and cooling loads in typical New Zealand and Australian buildings

Experimental performance of water cooled building integrated photovoltaic/thermal solar collectors

The idea of integrating water cooled photovoltaic/thermal collectors into building structures (BIPVT collectors) to provide electrical and heat energy is an area that has received only limited attention. BIPVT collectors are particularly attractive, as the integration of a single photovoltaic and thermal collector into the long-run roofing structure of a building could provide greater opportunity for the use of renewable solar energy technologies. In this study, the thermal efficiency of a novel low cost water cooled building integrated photovoltaic/thermal (BIPVT) solar collector was experimentally measured. The results show that despite being made of a typical roofing material, the thermal efficiency is not unreasonably affected. Furthermore, it is shown that the measured efficiency is similar to that predicted by the Hottel-Whillier equations

Performance of coloured solar collectors

The use of solar collectors with coloured absorbers for water heating is an area of particular interest when considering their integration with buildings. By matching the absorber colour with that of the roof or façade of the building, it is possible to achieve an architecturally and visually pleasing result. Despite the potential for the use of coloured absorbers very little work has been undertaken in the field. In this study, the thermal performance of a series of coloured, ranging from white to black, water heating solar collectors is examined. Subsequently, the annual solar fraction for typical water heating systems with coloured absorbers is calculated. The results show that coloured solar collector absorbers can make noticeable contributions to heating loads. Furthermore, although their thermal efficiency is lower than highly developed selective coating absorbers, they offer the advantage of sensitive integration with buildings

A combined optical, thermal and electrical performance model of a Building Integrated Photovoltaic/Thermal Concentrator (BIPVTC)

The electrical output of concentrating photovoltaic devices is significantly affected by the temperature of the photovoltaic cells. The ability to actively cool photovoltaic cells under concentrated radiation allows their electrical efficiency to be maintained particularly during periods of high solar radiation when concentration offers the maximum benefit. In this study, the design of a novel photovoltaic/thermal solar concentrator for building integration (BIPVTC) is discussed. The optical, thermal and electrical performance of the collector was theoretically modelled and validated with experimental data. The results show that BIPVTC offers improved electrical yields from both concentrating radiation onto the photovoltaic cells and also by actively cooling them

Performance of a building integrated photovoltaic/thermal (BIPVT) solar collector

The idea of combining photovoltaic and solar thermal collectors (PVT collectors) to provide electrical and heat energy is an area that has, until recently, received only limited attention. Although PVTs are not as prevalent as solar thermal systems, the integration of photovoltaic and solar thermal collectors into the walls or roofing structure of a building could provide greater opportunity for the use of renewable solar energy technologies. In this study, the design of a novel building integrated photovoltaic/thermal (BIPVT) solar collector was theoretically analysed through the use of a modified Hottel–Whillier model and was validated with experimental data from testing on a prototype BIPVT collector. The results showed that key design parameters such as the fin efficiency, the thermal conductivity between the PV cells and their supporting structure, and the lamination method had a significant influence on both the electrical and thermal efficiency of the BIPVT. Furthermore, it was shown that the BIPVT could be made of lower cost materials, such as pre-coated colour steel, without significant decreases in efficiency. Finally, it was shown that by integrating the BIPVT into the building rather than onto the building could result in a lower cost system. This was illustrated by the finding that insulating the rear of the BIPVT may be unnecessary when it is integrated into a roof above an enclosed air filled attic, as this air space acts as a passive insulating barrier

Demonstration of improved sensitivity of echo atom interferometers to gravitational acceleration

We have developed two configurations of an echo interferometer that rely on standing wave excitation of a laser-cooled sample of rubidium atoms. Both configurations are sensitive to acceleration along the axis of excitation. For a two-pulse configuration, the signal from the interferometer is modulated at the recoil frequency and exhibits a sinusoidal frequency chirp as a function of pulse spacing. In comparison, for a three-pulse stimulated echo configuration, the signal is observed without recoil modulation and exhibits a modulation at a single frequency as a function of pulse spacing. The three-pulse configuration is less sensitive to effects of vibrations and magnetic field curvature, leading to a longer experimental timescale. For both configurations of the interferometer, we show that a measurement of acceleration with a statistical precision of 0.5% can be realized by analyzing the shape of the echo envelope, which has a temporal duration of a few microseconds. Using the two-pulse interferometer, we obtain measurements of acceleration that are statistically precise to 6 parts per million on a 25 ms timescale. In comparison, using the three-pulse interferometer, we obtain measurements of acceleration that are statistically precise to 75 parts per billion on a timescale of 70 ms. The inhomogeneous field of a magnetized vacuum chamber limited the experimental timescale and resulted in prominent systematic effects. Extended timescales and improved signal-to-noise ratio observed in recent echo experiments using a non-magnetic vacuum chamber suggest that echo techniques are suitable for a high precision measurement of gravitational acceleration g. We discuss methods for reducing systematic effects and improving the signal-to-noise ratio. Simulations suggest that an optimized experiment with improved vibration isolation that utilizes atoms selected in the magnetic sublevel mF = 0 state can result in measurements of g precise to 0.5 parts per billion with a timescale of 300 ms

The development of a novel large area building integrated solar collector for pool heating

Unglazed solar collectors have often been used a means of providing low cost heating to swimming pools. However, these systems are typically polymer style “mats” that are laid on top of a roof, often leading to poor aesthetics due to their lack of integration with the building itself. This study charts the development of a novel large area unglazed building integrated solar pool heating system (BIT), based on long run sheet metal roofing, from its initial conceptualisation through to its implementation. It discusses the design of the building integrated solar collector modules, the assessment of their performance through theoretical modelling and experimental validation. Subsequently, it shows the scaling of laboratory scale testing to a large area array through modelling and discusses the performance of the system in the “as-built” configuration. In doing this, it provides a succinct illustration of the design process for the development of the University of Waikato’s building integrated pool heating system

Preliminary catalog of pictures taken on the lunar surface during the Apollo 16 mission

A catalog of all pictures taken from the lunar module or the lunar surface during the Apollo 16 lunar stay is presented. The tabulations are arranged for the following specific uses: (1) given the number of a particular frame, find its location in the sequence of lunar surface activity, the station from which it was taken and the subject matter of the picture; (2) given a particular location or activity within the sequence of lunar surface activity, find the pictures taken at that time and their subject matter; and (3) given a sample number from the voice transcript listed, find the designation assigned to the same sample by the lunar receiving laboratory